Specially designed for JLR models.
Test modes includes CANBUS, ISO9141, KWP2000, J1850 etc.
> Read DTCs
> Clear DTCs
> Read live data stream
> Single brand of all models (OBDII-16 DLC)
> Full system diagnosis
> Upgrade via USB 2.0
> Freelander 2
> Discovery 2
> Discovery 3
> Discovery 4
> Range Rover Sport
> Range Rover
> Range Rover Evoque
> RLCM /Air Suspension
> HVAC/Air Conditioning
> Parking Assist
> Parking Aid
> VICM/Security/ Immo
> TCCM/Transfer Box
> Rain Sensor
> Light Check/ Lighting
> Display: 2.8” colour screen, 320 x 240 pixels display with contrast adjustment
> Operation temperature: 0ºC - 50ºC
> Storage temperature: -20ºC - 70ºC
> Power: 9V - 18V
> Operating current: 100mA@12V (typical)
> Power consumption: 1.2W (typical)
> Dimension: 121mm x 86mm x 26mm (L x W x H)
> Weight: 300g
> Hardcopy user manual
> 3-foot OBD II cable
> USB cable
> Nylon carry case
> I/M Readiness - I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
> Freeze frame - When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze data is a snapshot of the operating conditions at the time of an emission-related fault.
> O2 Sensor test - This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
> On-Board monitoring - This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
> Evap system test - The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
> Vehicle information - The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
> Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
> Turn off Check Engine Light (MIL), clear codes and reset monitors.
> Multilingual menu and DTC definitions- English, Spanish, and German, etc.